Cold Rolled Steel Metal Cut To Length Line For Transverse Shear

1.Description of goods:

Thin sheet Metal cut to length line for Transverse shear with stably speed by hydraulic system for cold-rolled steel

2. Introduction:
This metal coil decoiling, leveling and cut-to-length line is divided in to three kinds because of different strip thickness and strip width, including thin sheet cut to length line, middle thick coil cut to length and thick sheet cut to length line. Among them, the thin sheet cut to length line: strip thickness: 0.3~3mm or (0.5~3) mm; strip width: 300~1600mm or 300~1800mm.

3. Application:
The thin sheet cut to length line apply to process cold-rolled steel, hot-rolled steel, carbon steel, stainless steel, galvanized steel, color steel plates and the various metal materials.
The thin sheet cut to length line is also divided into two kinds, due to different material of coils strip thickness, strip width, cutting speed and material of disc cutter.

4. The detail specification as follows:
MA-(0.3-3)×1600mm Cut to Length Line
Material of coils: CR galvanized steel plate, carbon steel and etc.
Strip thickness: 0.3~3mm.
Strip width: 300~1600mm.
Inner diameter of coils: Φ480-520mm..
Max.outer diameter of coils: Φ900-1800mm.
Max.coil weight: 15000kg.
Uncoiling mandrel: Ф508×1700mm.
Leveling roller: Φ85.
Material of leveling roller: 40Cr.
Material of disc cutter: 6CrW2Si.
Recoiling spindle: Φ508×750mm.
Cutting speed: (0~60) m/min, adjustable.

5. Technical Parameters of Thin Sheet Cut to Length Line:

0.3-3×1600mm sheet metal cut to length line

CE sheet metal cut to length line

0.3-3mm precision cut to length line

Cold Rolled Steel Metal Cut To Length Line For Transverse Shear Images